Design for Digital Fabrication - Student Work - Vinyl Tattoo

Art277 - Design for Digital Fabrication
Vinyl Tattoo

For this project students were asked to look to tattoos as inspiration for creating body adornment. They started with sketches, converted those into Rhino curves, and then output the design to the vinyl cutter, cleaned up the sticker and then stuck it on the body/clothing.  


















Design for Digital Fabrication - Student Work - 3D Printed Ring Documentation off the Body

ART277 - Design for Digital Fabrication
3D Printed Architecture Inspired Ring

For this project, students used Rhino to design a ring inspired by architecture. Students printed their own preliminary ring size tests on the Makerbots in the DCRL, and then got the final designs printed through Shapeways. They all fit!































Basilica de la Sagrada Familia - Antoni Gaudi

I visited the Basilica de la Sagrada Familia in Barcelona over winter break. I knew that I was going to be in awe of the architecture, but I hadn't considered the possibility of finding something so familiar. As I came upon the structure I started having the nerdiest thoughts, "I wonder if they did that with a CNC? I bet they did that with a CNC! I could do that. I can't believe this entire thing is being built with a CNC!" The entire thing hasn't been built with a CNC because they started construction in the late 1800's but, a lot of today's fabrication is... It's pretty amazing to walk around the outside and inside of the basilica and to be able to notice process in the aesthetics.








 I absolutely loved how the lights on the capitals reminded me of cabochon jewels, but also fruit hanging from the palm trees.

The light through the windows was absolutely stunning, these images don't do it nearly enough justice. 













Every single detail has been considered. 





These giant metal doors made me drool.














 THIS WAS THE ICING ON THE CAKE: 
 Below the Basilica was a whole museum dedicated to the process that housed many original architectural models, drawings and current models and drawings. 






 When we walked by this room Tom goes, "Look, their own DCRL!" Be still my heart.

 I'd love to see the crew in action. 



We rode the elevator up to the top of one of the towers and walked down the spiral staircase. It was actually terrifying because it was so windy, but the structure didn't move at all... so that was reassuring. The tops of the towers have mosaic "finial" type structures of fruit and vegetables. They catch the light just right. 







Making a 3D Printer - Control Box

I made a box out of MDF to house the electronics for my 3D Printer. I started with some rough sketches, cut the 1/2" MDF on the table saw and then the 1/4" on the laser cutter. Here's what I've got so far: 





 It took a lot of trouble shooting to get the alignment just right. 




Both of the sides slide out for easy access to the electronics. 
Eventually I will paint the box after drilling a few holes in the top for the cords to go through. 

IMA - Final Project Part 3

Here are some more images from the construction of the project I made for Interactive and Multimedia Art. I used this 1/8" x 3/4" copper stock to make the "buttons" for the project. They are all wired up to an Arduino. I ended up running a ground plane of steel just below each copper strip too. I built a foam stand for the TV to rest on.